TP-210 1300mm Bopp Tape Slitting Machine

TP-210型 bopp tape slitting machine

 

Function Features：

1⃣Used for cutting various printing tapes of BOPP。

2⃣The arched unrolling wheel is adopted, and the unrolling wheel is a unique arched design, which can eliminate the wrinkling phenomenon of the tape during unrolling or feeding。

3⃣This machine adopts a centralized control panel, and the three-stage counter setting parameters and key types can be controlled at the same time, and the operation is convenient and simple.。

1.Stop for manual labeling; four-axis automatic exchange .

2.Embossed Teflon is used as the main transmission mechanism, and the idler is anodized aluminum wheel。

3.10KG pneumatic brake is used for unwinding. When the machine stops, the tape can be stopped instantly, with accurate positioning and labeling.。

4.The unwinding adopts an air-expanding shaft, which is convenient for unloading and loading of unwinding semi-finished products。

5.Automatic meter recording function, automatically decelerates and stops when reaching the set length of meters, reducing material waste。

6.The main engine is controlled by frequency conversion, and the transmission part adopts sprocket drive。

7.Oriented winding large roll waste。

 

Mechanical parameters：

Maximum Mechanical Width………………2450mm

Maximum Raw Width………………1300mm

Maximum raw material diameter………………800mm　　

Maximum winding diameter……350mm（Dual axis exchange）

Maximum winding diameter…….230mm（Four-axis exchange）

Min Strip Width………………12mm

Striping………………………3 hole straight knife

mechanical maximum speed…………180m-200m/min

Paper Tube Inner Diameter……………3 inch inner core（76mm）

Use air source…………………6Kgf/cm2

power supply……………………….380v/50HZ

 

Frontside:

Backside:

TP-208 auto paper core loading machine

 

Function Features：

1⃣Fast and efficient, it is used with 5-7.5kw air compressors and molds of corresponding specifications and sizes.

2⃣Automatic unloading of finished tape and automatic device for paper tube.

 

Frontside：

TP-206 auto paper core cutting machine

 

Function Features：

1⃣Pneumatic circuit design realizes the automatic retraction and advance of the cutter

2⃣Automatic discharge of cutting paper tubes

3⃣Adopting mechanical depth of cut control, accurate positioning of depth of cut

 

Mechanical parameters：

1⃣Maximum cutting width………………600mm

2⃣Minimum cutting width………………7mm

3⃣Paper Tube Inner Diameter……………………..76mm

4⃣Paper Tube Thickness……………………..3-5mm

5⃣Main engine power……………………..3kw

6⃣barometric pressure…………………………….6kg/c㎡

7⃣voltage……………………..380V/50HZ

 

Frontside

TP-205 small rewinding machine

 

Function Features：

Rewind the defective tape and measure the length of a single roll of finished tape.

 

Mechanical parameters：

1⃣Maximum winding diameter………………………350mm

2⃣Maximum winding width………………………70mm

3⃣Paper Tube Inner Diameter……………………………..76mm

4⃣monitor rate……………………………..750w

5⃣voltage……………………………..220v

 

Frontside

We are source factory manufacturing 🤝Welcome to visit the factory

1、Installation and commissioning of equipment:

The manufacturer arranges masters to come to the site for installation and commissioning and technical training.

Equipment quality guarantee period: From the date of delivery of the machine, the supplier provides a one-year whole machine service (including free replacement of non-artificially damaged parts), and provides life-long maintenance of the machine。

2、If the equipment breaks down beyond the warranty period, and the buyer is unable to repair it, the supplier will provide technical support and provide solutions to the failure.

If the supplier needs to send personnel to the site for repairs or provide replacement parts, the buyer will be responsible for the corresponding costs depending on the specific circumstances. cost。

3、Over the equipment warranty period, the supplier should be able to guarantee the long-term paid spare parts of the machine。