TP-213 BoppTape Slitting Machine

TP-213 tape slitting machine

 

Function：

1.Used for slitting various transparent, colored and printing tapes of BOPP。

2.The unwinding tension adopts pneumatic control, and the winding tension adopts dual control, which can automatically adjust the tension。

3.This machine adopts a three-stage counter to set parameters and keys, which can be controlled at the same time, and the operation is convenient and simple.。

4.Automatic feeding hook, easy to load large tape master rolls, silencer shaft to reduce noise, stop manual labeling; four-axis automatic exchange without stopping the machine to change the shaft up and down.

5.Embossed Teflon is used as the main transmission mechanism, and the idler is anodized aluminum wheel。

6.The brake adopts air pressure brake, the tape can be stopped instantly when stopping, and the positioning is accurate。

7.Unwinding adopts mechanical unwinding shaft, which is convenient for unloading and loading of unwinding semi-finished products。

8.Automatic meter recording function, automatically decelerates and stops when reaching the set length of meters, reducing material waste。

9.The main engine is controlled by frequency conversion, and the transmission part adopts sprocket drive。

10.Moving Roller Winding Tape Large Mother Roll Waste Edge。

 

Mechanical parameters：

Maximum Mechanical Width：2450mm

Maximum Raw Width：1300mm

Maximum raw material diameter：800mm　　

Maximum winding diameter：350mm（Dual axis exchange）

Maximum winding diameter：230mm（Four-axis exchange）

Min Strip Width：12mm

Slitting method：3 hole straight knife

Speed：180-220m/min

Paper Core Dia：3inch（76mm）

Air source：6Kgf/cm2

Power：380v/50HZ

 

Front

 

Back

 

TP-208 auto paper core loading machine

 

Features：

1⃣Fast and efficient, it is used together with 5-7.5kw air compressors and molds of corresponding specifications and sizes.

2⃣Automatic unloading of finished tape and automatic device for paper tube.

 

Front：

TP-206 paper tube cutting machine

 

Features：

1⃣Pneumatic circuit design realizes the automatic retraction and advance of the cutter

2⃣Automatic discharge of cut finished paper tubes

3⃣Adopting mechanical depth of cut control, accurate positioning of depth of cut

 

Mechanical parameters：

Maximum cutting width………………600mm

Minimum cutting width………………7mm

Paper Tube Inner Diameter……………………..76mm

Paper Tube Thickness……………………..3-5mm

Motor power……………………..3kw

Air source…………………………….6kg/c㎡

Power……………………..380V/50HZ

 

Front

 

TP-205 Rewinding machine

 

Features：

Rewind the defective tape and measure the length of a single roll of finished tape.

 

Mechanical parameters：

Maximum winding diameter………………………350mm

Maximum winding width………………………70mm

Paper Tube Inner Diameter……………………………..76mm

Main motor power……………………………..750w

Power……………………………..220v

 

Front

We are source factory manufacturing 🤝Welcome to visit the factory

1、Installation and commissioning of equipment: The manufacturer arranges masters to come to the site for installation and commissioning and technical training. Equipment quality guarantee period: From the date of delivery of the machine, the supplier provides a one-year whole machine service (including free replacement of non-artificially damaged parts), and provides life-long maintenance of the machine。

2、If the equipment breaks down beyond the warranty period, and the buyer is unable to repair it, the supplier will provide technical support and provide solutions to the failure. If the supplier needs to send personnel to the site for repairs or provide replacement parts, the buyer will be responsible for the corresponding costs depending on the specific circumstances. cost.

3、Outside the equipment warranty period, the supplier should be able to guarantee the long-term provision of spare parts for the machine.