TP-210 Tape Slitting Machine
Manual master roll loading
Category:
Bopp tape slitting machine
key word:
Tepu
Product Introduction
Tech parameters
|
Length x width x height |
2.45m*1 .3m*1 .37m |
|
Voltage |
3phase,380v,50HZ |
|
Working speed |
0-220m /min |
|
power |
4KW |
|
Maximum cutting width |
1300mm |
|
Minimum cutting width |
12mm |
Main functions
- Manual master roll loading
- Noise reduction system: Excludes muffler shaft
- Directional waste edge collection system
- Pneumatic brake system
- 4-axis exchange with shutdown for shaft replacement
- Manual labeling
- Three-stage counter control panel
|
B. Paper pipe and tube scheming machine |
|
|
Length x width x height |
5.5m*0.7m*1 .4m |
|
Inner diameter dimensions of paper tubes |
3 inches |
|
C :Paper Cutting Tube Machine |
|
|
Length x width x height |
1.5m*0.63m*1.05m |
|
Paper cutting tube width |
Based on mold size |
|
Paper cutting tube diameter |
76.2mm |
| D: Small rewinder | |
| Correct tape, rewinding and measuring the number of meters | |
| size | 0.54*0.4*0.6m |
| Maximum rewinding diameter | 300MM |
| Maximum rewinding width | 100mm |
| Inner diameter of paper tube | 3'' |
| Rewinding speed | MAX. 120m/min |
next page
Related products
Message
If you are interested in our products, welcome to leave a message, we will contact you as soon as possible!